Wireless Access

last person joined: 12 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Analize traffic

This thread has been viewed 3 times

  • 1.  Analize traffic

    Posted Feb 22, 2013 05:31 AM

    Hello

     

     We would like to do deep inspection of our traffic, as by now there is no support in AOS for Netflow or Sflow, it's there another way to get traffic info of our users? Because if i go with a switch in mirror mode I will lost traffic information.

     

    Any advice?

     

    Regards



  • 2.  RE: Analize traffic

    EMPLOYEE
    Posted Feb 22, 2013 06:20 AM

    If you have a switch layer2 connected to your Aruba controller for your user VLANs you can do your analysis from that switch..

     



  • 3.  RE: Analize traffic

    Posted Feb 26, 2013 04:54 AM

    This it's not the case because right now we are doing NAT on the controller, so i lost the information about users. Right now we are doing a lot of syslog and splunk analyze, but i belive it's not the best solution.

     

    Regards



  • 4.  RE: Analize traffic

    Posted Feb 26, 2013 05:08 AM

    You might like to look at AOS 6.2 with the new 'firewall visibility' features.

    Currently we do not support openflow or sflow.



  • 5.  RE: Analize traffic

    Posted Mar 07, 2013 08:13 AM

    Many thanks Giles i will test in the lab setup