Wireless Access

Reply
Contributor II
Posts: 52
Registered: ‎12-11-2012

Apple iOS Wispr and Captive Portal

We have a 7210 controller with several AP225 for our campus deployment. When i tested the guest captive portal setup on an Andriod, the guest login page is pulled automatically once they connect to the Guest SSID. They did not have to open a browser. On the other hand, on an iOS device, we have to go manually open the browser to get the guest captive portal login page to open. Is there a way to get iOS devices to open the guest captive portal page automally when they connect tot he Guest SSID?

 

Thanks,

Chan

Guru Elite
Posts: 21,480
Registered: ‎03-29-2007

Re: Apple iOS Wispr and Captive Portal

Make sure in the Captive Portal authentication profile that you do not have "Bypass Apple Captive Network Assistant" enabled.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 52
Registered: ‎12-11-2012

Re: Apple iOS Wispr and Captive Portal

Below is our existing captive portal profile. Are you saying to remove the command "apple-cna-bypass"?

 

 

!
aaa authentication captive-portal "ABC-Guest"    
   default-role "DNR-Guest-auth"
   default-guest-role "ABC-Guest-auth"
   server-group "Clearpass-group"
   redirect-pause 1
   no logout-popup-window
   protocol-http
   login-page "http://1.2.3.4/guest/guest-registration-page.php"
   no enable-welcome-page
   apple-cna-bypass
!

Guru Elite
Posts: 21,480
Registered: ‎03-29-2007

Re: Apple iOS Wispr and Captive Portal

Yes


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: