Wireless Access

Reply
Occasional Contributor I

Apply SSID policy to AP 105,205 and 3x5

Hello,

 

I don't know since when but now when I want to create a new SSID and to apply it to all my APs I didn't have the same behavior following sites.

I am using a cluster of 3400 with the latest version available and I am using 3 kind of sites

site 1 with AP105 only

site 2 with AP 205 and 325

site 3 with AP 105,205 and 325

 

with old and even new SSID when I want to apply it

Site 1 : SSID is well applied

Site 2 : SSID is well applied

site 3 : only AP 205 and 305 recieved the policy but not 105

 

And I don't know if I missed something or how I can troubleshoot why on site with AP 105 and 205 , AP105 didn"t receive the SSID ?

thanks for your help

Regards

 

Guru Elite

Re: Apply SSID policy to AP 105,205 and 3x5

How is that SSID configured different from the other 2?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: Apply SSID policy to AP 105,205 and 3x5

no I am sure of my parameter

 

Site with 2 different model AP105 and AP205: AP105 didn't receive the SSID

site with AP105 only works

 

how can i troubleshoot such issue ?

Guru Elite

Re: Apply SSID policy to AP 105,205 and 3x5

You need to start by comparing the differences between configurations on each SSID.

 

You can also type "show ap bss-table" to see what SSIDs are really being broadcast from each access point.

 

Typing "show profile-errors" might also give you an idea what your problem is.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: Apply SSID policy to AP 105,205 and 3x5

In fact I found the solution and it's about the number of SSID supported by the AP105 (16 BSSID) so in my case 8 BSSId per radio( 2.4, 5G) and I reach this limit.

 

Sorry and many thanks to people who helped me.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: