Wireless Access

Reply
Contributor II

Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

I guess I've missed something easy and basic, but I've configured the system - with MD group and 2 MDs. 

When looking in GUI I can see Virtual AP profiles, SSID profiles and ap-groups. 

but in CLI - I've tried all different config nodes, /md and /md/internal and /LocalControllerA -running show wlan virtual-ap all show DEFAULT only. 

but when running MDCONNECT to /LocalControllerA - running the same command shows all VAPs that are published on that controller - but not the rest 

 

this goes for other commands like wlan ssid-profile, ap group. 

 

 

MVP

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

Hi Jakob,

 

that is correct. 

 

If you do not mdconnect to the md, you won't be able to see the configuration that the device is running.

 

Regarding the group - You could see the output of the whole configuration file : show config effective /md/WHATEVER but you won't be able to see a particular show aaa profile xxx command.

 

 

 

 

Regards,
Borja
ACMX #567 //ACCP//CWNA//CWAP
Contributor II

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

OK 

 

but I want to edit and configure ssid profile from CLI - on the /MD/Internal-group node so configuration will propagate to all MDs - but is cannot find the SSID-Profile in CLI - but it will find it in GUI 

 

also - on the side, I've created SSID-Profile on /MD node. but then, unaware I did changed to SSID-Profile directly on MD device. Now - it looks like the propagation is broken - naturally. How to restore this? 

MVP

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

You could md/GROUP/yourNode and delete the SSID profile on that node. Remeber to commit.

 

Afterwards, you can create it on the GROUP and it will be sent to all the MD's in that group.

Regards,
Borja
ACMX #567 //ACCP//CWNA//CWAP
MVP

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

As an example:

 

I created a group: PRODUCTION, with 2 MD's.

 

I created a ssid profile on /md/PRODCUTION level called: 

ssid_test_to_delete

  Obviously it has been sent to both MD's.

 

If I try to modifiy it, I see that SSID profile on the /md/PRODUCTION level as below:

 

(mm03) [PRODUCTION] (config) #wlan  ssid-profile 
default
ssid_test_to_delete
<profile-name>          Profile name

Is that what you were looking for?

 

"but I want to edit and configure ssid profile from CLI - on the /MD/Internal-group node so configuration will propagate to all MDs - but is cannot find the SSID-Profile in CLI - but it will find it in GUI "

Regards,
Borja
ACMX #567 //ACCP//CWNA//CWAP
Contributor II

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

You can use the 'show configuration effective' in the md folder to see the config for that md


#AirheadsMobile
Contributor II

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

Looks likes there's something fishy with my setup then .... 

 

from CLI:

 

(93ARUBAMM01) [Intern] #show wlan ssid-profile

SSID Profile List
-----------------
Name References Profile Status
---- ---------- --------------
default 1

Total:1

 

see attached from picture: 

Capture_aruba.PNG

 

and CLI directly on controller - it shows the WLAN profiles that is in use with that controller

 

(93ARUBAMM01) [Intern] #cd lc7220a
(93ARUBAMM01) [00:1a:1e:00:1e:d0] #mdconnect


Redirecting to Managed Device Shell
Last login: Thu Jan 18 14:04:58 2018 from 10.100.99.111
(LC7220A) [MDC] *#show wlan ssid-profile

SSID Profile List
-----------------
Name References Profile Status
---- ---------- --------------
default 1
SSID-XXX 1
SSID-XXXX 2
SSID-XXXXX 1
SSID-XXXXXX 1

Total:5
(LC7220A) [MDC] *#

 

Back in the days - with 6.5 i could do a 

conf t

wlan ssid-profile SSID-Profile1 <enter>

configure settings

 

but in AOS 8.2 i cannot do this on Intern MD node - which is where I've added all my settings - to be able to handle SSID settings for MD Group Intern, DMZ and Secure in one location

MVP

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

Do:

 

cd /md/Intern

 

conf t

 

wlan ssid-profile ?

 

And you will see the profiles in there.

Regards,
Borja
ACMX #567 //ACCP//CWNA//CWAP
Contributor II

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

doh !! 

thanks --- so easy, yet so far away sometimes. 

Thought that if I cannot see them, I can't edit. 

 

brilliant - works now

Contributor II

Re: Aruba AOS 8.2 CLI doesn't reflect what GUI is showing

thanks 

 

this is also a good command, unfortunately - I needed it somewhere more granular than that - got the answer, looks like my mind was stuck in 6.5 rather than 8.2

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: