05-31-2014 07:48 AM
I am having problem in upgrading aruba controller 3400 AOS ,As i upgraded to new verison 22.214.171.124 my APs turned into air moniter mode,can some body adivce me how to fix this issue.
Solved! Go to Solution.
05-31-2014 08:09 AM
also, what is your regulatory domain?
If my post is helpful please give kudos, or mark as solved if it answers your post.
ACCP, ACMP, ACMX #294
06-01-2014 01:58 AM - edited 06-01-2014 02:26 AM
Dear Haris bro,
Please confirm , what country code is set on controller ? is country code is GB or US ?
If its GB then you cannot set the regulatory domain of AP profile to US. Country code and regulatory domain profile for AP's must be same.
On Monitoring tab, All Access points -> some AP's which are not working properly having E-Flags means regulatory domain miss match..
Same issue with me at IMH
06-01-2014 10:11 PM
(The above post - seems to be your solution)
If everything is US (controller / AP'S / reg-profile) , then try to uprgade to newer AOS (126.96.36.199) and see if problem solved.
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
06-01-2014 11:33 PM
thanks for the help,i resolved my issue by chaning regulatory domain from US to GB and it solved the problem.Thanks..