02-21-2013 10:21 AM
I have an Aruba 650 controller and am connecting AP105s to it with AirWave/Activate. I'm currently troubleshooting routing issues i'm having.
When logged into the AP CLI - running the command 'show datapath route' displays what I call 2 routing tables. I'm guessing one is for the virtual controller and the other is for the AP and associated clients? ANyways - my show datapath route has a default route that uses a gateway that is not correct. I also somehow have a route for 18.104.22.168/4 using a correct gateway. So I can access cnn.com for example because it pings to 199.x.x.x but google is 74.x.x.x so I cannot access this. The google would fall under the default route statement and cnn would fall under the 22.214.171.124/4 route statement.
My question is how do I make changes to the routing table on the AP that the associated clients use? The 126.96.36.199 routing statement is using my firewall as the default route which I want the 0.0.0.0 to use. Its as if I have a tunneling issue but Im not sure where the 188.8.131.52 route even came from - where is this defined? How can I change this routing table?
On a side note - on the GUI of the AP I can click configuration / VPN / Routing Tab and see a totally different routing table than the two in the APs CLI 'show datapath route'
Any help is appreciated.
02-21-2013 11:50 AM - edited 02-21-2013 12:24 PM
i hope i understood you right :smileyvery-happy: you have iAP-105 connected with vpn to A650 controller right? :smileysurprised:
if so please read bellow info:
please download and read the following pdf: (please read page 3)
I also attached the userguide for u the read the need info (start from 243)
let me know if it gave u some idea
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
02-25-2013 12:54 PM
Thanks for the response. Aruba support has notified me that we have a bug and I am awaiting a patch release expected next week sometime.
From my iAP - 'show datapath route' - I do not see my default route statement correctly. This is the issue. I have manually created routes. - 184.108.40.206 254.0.0.0 gateway / 220.127.116.11 252.0.0.0 gateway / 18.104.22.168 248.0.0.0 gateway - etc.