Wireless Access

last person joined: 4 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba Instant and Upnp/SSDP multicast problem with Airtame Device

This thread has been viewed 5 times

  • 1.  Aruba Instant and Upnp/SSDP multicast problem with Airtame Device

    Posted Apr 16, 2018 03:24 AM

    I use "Airtame" products to deliver content to my meeting rooms, this product uses SSDP/Upnp discovery to display devices available on the network. The concern is that this discovery does not work when my Airtame product is connected to the WIFI terminal. I have no problems on my wired network.

    Airtames products are also Airplay compatible, on this point I have no worries, the discovery works well.

    For information:

    I have a classic network without any Vlan or ACL.
    I added this service in Airgroup : urn:airtame-com:device:airtame:1

    Thanks for your help



  • 2.  RE: Aruba Instant and Upnp/SSDP multicast problem with Airtame Device

    Posted Apr 16, 2018 05:46 AM

    For information I found the following 2 debug commands on this same forum :

    show airgroup blocked-service-id
    show airgroup blocked-queries


    So I added: _airtame._tcp in SERVICE ID

    It is no longer blocked after verification with the famous command.

    On the other hand obviously I have a "Queries" of blocked



  • 3.  RE: Aruba Instant and Upnp/SSDP multicast problem with Airtame Device
    Best Answer

    Posted Apr 19, 2018 02:30 AM

    the solution has been found

    When you only have one vlan, you should not activate the Airgroup services.

    Everything's okay now.