Wireless Access

Reply
Occasional Contributor II

Assigning wireless users to different VLANS based on Radius authentication

Hi,

 

(Re-edited)

 

Using a IAS as a Radius back-end and returning the VLAN in which the user belongs to based, for example, group membership works fine - But I've only tried this without terminating it on the controller.

 

Besides having a certificate on the controller - Does this basically work without configuration changes if I terminate the Radius authentication on the wireless controller instead? A bit unsure on this point - Are the attributes necessary still get returned to the controller - in this case, the VLAN the user should end up in?

 

Regards

Tommy

Occasional Contributor I

Re: Assigning wireless users to different VLANS based on Radius authentication

I can say that it works for me when the authentication is terminated on the controller.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: