Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

CLI enable password

This thread has been viewed 8 times

  • 1.  CLI enable password

    Posted Mar 09, 2015 07:00 AM

    Hello, am using ArubaOS and 2 controllers - 3200 and 3200xm.

    I have been asked to find out the memory these controllers have, i've done so on one of the controllers using the show memory command. Problem i have is on the second controller i can't enable the # prompt as the password isn't the asme as the first controller. Is there anyway around this or is there another way i can find out memory for that controller ?

     

    Thanks



  • 2.  RE: CLI enable password
    Best Answer

    Posted Mar 09, 2015 08:00 AM

    Hi,

     

    If you don't have only enable password, you can log in through web (GUI), it will bypass the enable password. you have 2 more options to get the memory information,

     

    1. reset the password with, login : password, password : forgetme!

     

    2. Console the controller over serial port and reboot and monitor the POST messages, it will display memory information.

     

    For your ref :

     

    post1.JPG

     

    Please feel free for any further query on this.