Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Campus WLAN wizard only creates "aruba-ap"

This thread has been viewed 1 times

  • 1.  Campus WLAN wizard only creates "aruba-ap"

    Posted Oct 03, 2016 03:49 AM

    Mobility controller 7200, some 30 AP-215. Software version 6.4.4.9

     

    Whatever SSID (PSK) I try to create with the Campus WLAN-wizard only creates an SSID "aruba-ap". If I try to create another SSID i get an error like "Error: Duplicate ESSID "aruba-ap"".

     

    If I remove the erroneus "aruba-ap" I'm able to create a new SSID, but this one too, is named "aruba-ap".

     

    Has anyone else encountered this problem?



  • 2.  RE: Campus WLAN wizard only creates "aruba-ap"

    Posted Oct 03, 2016 04:01 AM

    Also, I have found that using the same wizard to remove a WLAN works weird. If I highlight a WLAN, and click Delete, the WLAN won't be deleted until I step through the wizard for any other WLAN available.



  • 3.  RE: Campus WLAN wizard only creates "aruba-ap"

    Posted Oct 03, 2016 04:22 AM

    I upgraded to 6.5.0.1 and the problem is still there.



  • 4.  RE: Campus WLAN wizard only creates "aruba-ap"

    Posted Oct 03, 2016 04:33 AM

    Found a workaround so I can continue with other stuff. Went to Configuration -> AP Group -> Edit "group"

     

    Clicked Wireless LAN -> Virtual AP -> "TheSSID-vap_prof" -> SSID and set the SSID from "aruba-ap" to the desired value.