Wireless Access

Reply
Frequent Contributor I
Posts: 87
Registered: ‎10-19-2015

Can I set the max power on individual APs when they are in a cluster?

Hello,

 

I know I can set the max power for all the APs from the virtual controller.  I was curious if I could select a specific AP and modify it's power settings without impacting the power settings for the rest of the group.

MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: Can I set the max power on individual APs when they are in a cluster?

Unfortunately no
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Frequent Contributor I
Posts: 87
Registered: ‎10-19-2015

Re: Can I set the max power on individual APs when they are in a cluster?

Bummer - that would be a great feature to add.    That and a way of increasing the automatic logout of the web interface for the APs.   It logs me out WAY too quickly.  Oh and perhaps better logging so I could better diagnose connectivity issues after they've happened. Other than that, not a lot of complaints with my first Aruba wireless network.

Search Airheads
Showing results for 
Search instead for 
Did you mean: