We have an aruba 620 controller with one(1) unit Access Point(AP 105). The problem that im facing right now is I want to reconfigure the controller to fit our new setup. Currently our aruba controller is connected to existing setup which is
internet
| |
|
router
| (10.118.10.0/24)
|
/ \
/ \
/ Aruba 620 ------------------>AP105
firewall (10.118.10.10) (10.118.10.15)
(vlan20,30)
/
Manage Switch
Firewall external IP(10.118.10.55)
Internal IP(10.65.10.100)
VLAN 20 (10.65.1.0/24)
DHCP Server(10.65.1.3)
VLAN 30 (192.168.10.0/24)
1. Currently the setup is from router to Aruba and its working well.
2. I added the firewall so I can create another VLAN and have multiple SSID.
3. Currently I was able to add the SSID(LAN and Guest) but when I check its not getting any IP address from our DHCP server
From router to aruba(port is connected to Port 4 as access port. Port 0 is connected to AP as trunk) now from my manage switch(port 23 as trunk) I connect to Aruba port 7(as trunk) but im not getting any IP address from our DHCP server( 10.65.1.3). Do I need to create a route from Aruba or what I need to configure? Thanks.
Please help.