Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Clients are unable to get good internet bandwidth on Aruba wireless

This thread has been viewed 1 times

  • 1.  Clients are unable to get good internet bandwidth on Aruba wireless

    Posted Apr 15, 2015 03:55 AM

    Clients are unable to get good internet bandwidth on Aruba wireless (Aurba AP-225 and Controller - 7030)

     

     


    #AP225


  • 2.  RE: Clients are unable to get good internet bandwidth on Aruba wireless

    Posted Apr 15, 2015 06:08 AM

    Hi,

     

    How about other communication other than Internet ? what is the SNR you are seeing in the dash board ?

     

    Please feel free for any further help on this.



  • 3.  RE: Clients are unable to get good internet bandwidth on Aruba wireless

    Posted Apr 15, 2015 08:30 AM

    SNR ratio and Client connectivtiy interms of  speed and goodput are fine, but some how clients are not getting good bandwidth constantly,



  • 4.  RE: Clients are unable to get good internet bandwidth on Aruba wireless

    Posted Apr 15, 2015 09:26 AM

    HI,

     

    Is this happening with specific Users or with all the user. check any Band Width contract is configured in the user role ?

    you can use "show rights <rolename> to verify the same.

     

    Please feel free to comeback with the required information.



  • 5.  RE: Clients are unable to get good internet bandwidth on Aruba wireless

    Posted Apr 16, 2015 02:13 AM

    Its Happeing for all clients and for SSID's and there is no bandwidth contract applied for any users roles 

     



  • 6.  RE: Clients are unable to get good internet bandwidth on Aruba wireless

    EMPLOYEE
    Posted Apr 16, 2015 05:41 AM

    Please look at the article here:  http://community.arubanetworks.com/t5/Technology-Blog/Removing-the-Bottleneck-in-Wireless/ba-p/77978