Wireless Access

Reply
Frequent Contributor I
Posts: 64
Registered: ‎03-21-2011

Configure SSH

Can someone tell me the CLI commands to enable SSH and set the password in a aruba controller running 6.3.1.4

 

Thank you,

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: Configure SSH

It is enabled by default. Set credentials using the mgmt-user command.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Aruba
Posts: 429
Registered: ‎05-30-2012

Re: Configure SSH

Mark,

SSH is enabled by default unless you have an ACL in place to block it.

 

To create a user, use the "mgmt-user" commands.

 

Best regards,

 

Madani

Frequent Contributor I
Posts: 64
Registered: ‎03-21-2011

Re: Configure SSH

Thanks for your help. Can you also help me distiguish between the web UI login and SSH or are they the same?

 

Also, commands to configure telnet.

 

Thank you,

Aruba
Posts: 429
Registered: ‎05-30-2012

Re: Configure SSH

The "mgmt-user" accounts are the same for the CLI and the WebUI.

 

To enable telnet, use "telnet cli".

 

Best regards,

 

Madani

Search Airheads
Showing results for 
Search instead for 
Did you mean: