Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Confirm if IAP or AP

This thread has been viewed 1 times

  • 1.  Confirm if IAP or AP

    Posted Feb 25, 2015 11:10 AM

    I have a couple of AP-135s and i want to check if they are IAPs which does not need a WLAN Controller and which are APs which require a WLAN controller.



  • 2.  RE: Confirm if IAP or AP

    EMPLOYEE
    Posted Feb 25, 2015 11:13 AM
    The sticker on the back will say IAP-135


    Thanks, 
    Tim


  • 3.  RE: Confirm if IAP or AP

    Posted Feb 25, 2015 11:17 AM

    There are som APs, even though it was written on the boxes that they were IAPs, the sticker says AP-135 and also on the controller, all the APs are of type AP, even though i know for sure that some are IAP. Is there anywhere else i can confirm that? a command maybe?



  • 4.  RE: Confirm if IAP or AP

    Posted Feb 25, 2015 11:31 AM

    Found this in our community, may this help you..

    http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/controller-command-to-identify-AP-or-converted-IAP/td-p/184016

     

    Also you can console each of them and see the booting process, for AP and IAP the booting process is different. [like AP will search for master but IAP will not]