Wireless Access

Reply
Super Contributor II
Posts: 429
Registered: ‎01-19-2011

DHCP relay

On a 600 (M3) controller running 6.3.1.6 I need to disable the DHCP pools so that an external DHCP server can provide addresses. I seem to be having an issue with clients picking up addresses when i issue the "no service DHCP" command. Does this command disable the relay as well?

Guru Elite
Posts: 20,761
Registered: ‎03-29-2007

Re: DHCP relay

No.  The relay relies on the ip helper-address command which is separate from the "service dhcp" command.  The service dhcp command is to start and stop the internal dhcp server.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Super Contributor II
Posts: 429
Registered: ‎01-19-2011

Re: DHCP relay

I recognise they are different commands and may not seem directly connected, but on Cisco they are connected. Turning off the DHCP service means no relaying will happen. I wanted to confirm that the are separate processes on Aruba devices.

Guru Elite
Posts: 20,761
Registered: ‎03-29-2007

Re: DHCP relay

[ Edited ]

MattF,

That's why the community is here to explain.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: