03-12-2017 04:40 AM
What are the default logging that are enabled on the ARuba controller?
I am running on 184.108.40.206. As part of several troubleshooting I had few of them enabled over the course of time, and not able to conclude whether these are enabled by default or had been done manually.
(WLC_0001) #show running-config | include logging
logging level debugging network process dhcpd
logging level debugging network process dhcpd subcat dhcp
logging level debugging network subcat dhcp
logging level warnings security subcat ids
logging level warnings security subcat ids-ap
Can someone please confirm whether there any any logging that are enabled by default on the controller?
Is there any recommendation to have certain logging enabled throughout on the controller for ease of troubleshooting without compromising the CPU on the Controller?
03-12-2017 04:48 AM
The best is warnings on the top level. Warnings provide the best top-level logging. You can enable more if you want to dive deeper into something: http://www.arubanetworks.com/techdocs/ArubaOS_65x_
You can also reset everything to warnings by typing:
Aruba7640-US) (config) #no logging level (Aruba7640-US) (config) #show logging level verbose LOGGING LEVELS -------------- Facility Level Sub Category Process -------- ----- ------------ ------- arm warnings N/A N/A network warnings N/A N/A security warnings N/A N/A system warnings N/A N/A user warnings N/A N/A wireless warnings N/A N/A
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
03-12-2017 06:52 PM
Just an FYI, I had a similar number of debug logs running on my controller at one point and it started causing issues on the controller. I wouldn't run any debug logs for a extended amount of time, especially several of them at once.