Wireless Access

Reply
Super Contributor I

Dynamic or static IP for APs in controller

Hi guys,

 

Just a quick question. I have a customer with a controller and many APs, each one with its corresponding IP. How can I know from the controller if these AP IPs were obtain by DHCP or if they were statically configured?

 

Regards,

Julián

Guru Elite

Re: Dynamic or static IP for APs in controller

You would have to type "

show ap provisioning ap-name <name of ap>


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Super Contributor I

Re: Dynamic or static IP for APs in controller

Hi Colin,

 

I have tried this command, the difference I see is

  • When the AP IP is static the items Netmask and IP Addr show the values
  • When the AP IP is dynamic the items Netmask and IP Addr show N/A

Is this correct?

 

Regards,

Julián

Guru Elite

Re: Dynamic or static IP for APs in controller

Yes.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Super Contributor I

Re: Dynamic or static IP for APs in controller

Ok, many thanks!

 

Regards,

Julián

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: