06-15-2014 09:38 PM - edited 06-15-2014 09:42 PM
We have a MC 3600 and about 125 APs with averaging 400-500 concurrent daily wireless users in our network. We've got a pool of 5 live IPs from our ISP and one of the IPs is terminating directly onto the controller (VLAN IP). By some interim law, local authorities blacklist an live IP whenever voice traffic limit is reached and we have to always manually change the live IP in the controller. You cannot really predict when would the IP go down leaving us being in reactive mode. Also, upon request, the blocked IP is set to be usable again in about 48-72 hours and the cycle goes on and on...
Now my question is, is there a way that we can automate all this activity in Aruba controller? May be there is way to set pool of back-up IPs for relevant VLANs? or any Aruba or thrid-party script can do this?
* Please assume there is no external firewall or any router in the network.
Any suggestion would be highly appriciated.
Solved! Go to Solution.
06-16-2014 01:10 AM
There is no way that I know of to signal to a controller to change its ip address dynamically, no.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
06-16-2014 05:27 AM
06-16-2014 07:06 AM