Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Error while configuring Master Redundancy

This thread has been viewed 0 times

  • 1.  Error while configuring Master Redundancy

    Posted Sep 06, 2017 01:17 PM

    I'm trying to configure a pair of controllers for Master Redundancy using VRRP.  Every time I to enter the Master-redundancy configuration on one of the controllers, I get this error:


    Error processing the command: Error: Master IP 192.168.50.75 is configured

     

    That IP address was the one I gave the controller when I was originally preping it for implementation off site, but it has since been purged from the configuration entirely.  I can find it nowhere in the configuation at all yet the controller seems to think it is still there.

     

    Any help is appreciated.

     

    Thanks

     

    Bill

     

     

     



  • 2.  RE: Error while configuring Master Redundancy

    Posted Sep 07, 2017 02:53 AM

    Hi Bill,

     

    Will you be able to share the config file.



  • 3.  RE: Error while configuring Master Redundancy

    Posted Sep 07, 2017 10:04 AM
      |   view attached

    Current Running config attached

    Attachment(s)

    txt
    7205-runningconfig.txt   34 KB 1 version


  • 4.  RE: Error while configuring Master Redundancy
    Best Answer

    Posted Sep 08, 2017 02:39 PM

    A software upgrade to 6.4.4.15 and reboot of the controller fixed the issue.