Wireless Access

Reply
Contributor I

Estimate time 100 APs complete to upgrade

Hi

 

We will upgrade from 5.0.3.0 to 6.1.3.7 on 6000. We have a hundred Access points in field.

How long does it take all APs complete to upgrade? In my test, one AP takes about 5 minutes to complete.

CPU is ok to upgrade once for 100 AP?

 

Appreciate if i can get etimate time or benchmark for it.

 

Regards

Simon

 

 

Guru Elite

Re: Estimate time 100 APs complete to upgrade

 

it all depends on how fast your links are.  With all gigabit we have seen it take about 15 minutes.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

MVP

Re: Estimate time 100 APs complete to upgrade

I recently upgraded 4 sites from the master here at HQ

I did two batches, one with a single site having 118 APs which completed in 17 minutes over 2xT1 and the other batch covering 3 sites (92, 96 and 24 APs respectively) was complete in under 25 minutes also over 2xT1, although it filled the pipe for 20 of those minutes.

 

--Matthew

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Contributor I

Re: Estimate time 100 APs complete to upgrade

Cjoshph, Matthew

 

Thanks for your information.

it it really heplful information to get estimation.

 

Regards

Simon

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: