Hi Everyone,
I get problems with two controllers Master/local and HA Fast Failover.
When master controller, which hold AP, reload them the local controller put the A/P in "Inactive state". Controller run 6.4.3.6 OS.
I configured LMS IP in AP Group. and i see
Master Controller
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
40:e3:d6:cf:05:d2 AP_Group_Controller1 W-AP205 172.21.0.131 Up 6m:19s 172.21.0.2 172.21.0.3
Local Controller
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
40:e3:d6:cf:05:d2 AP_Group_Controller1 W-AP205 172.21.0.131 Up 7m:45s SI 172.21.0.2 172.21.0.3
After reboot master controller i see the AP in State Inactive
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
40:e3:d6:cf:05:d2 AP_Group_Controller1 W-AP205 172.21.0.131 Up 8m:39s I 172.21.0.3 172.21.0.2