Wireless Access

Reply
New Contributor

High mswitch/bin/fpcli process cpu on 6000 controller

My 6000 local controller is experiencing a high cpu process rate on the mswitch/bin/fpcli process.  I don't understand what this process is or what it does so it's difficult to troubleshoot the issue.  Need Help!

Guru Elite

Re: High mswitch/bin/fpcli process cpu on 6000 controller

Please open a support case, and do not attempt to troubleshoot.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
New Contributor

Re: High mswitch/bin/fpcli process cpu on 6000 controller

I already did that and it doesn't seem to be getting me anywhere. That's why I was wanting to gain some understanding of the issue.  Even getting a definition of what this means would be helpful.

Guru Elite

Re: High mswitch/bin/fpcli process cpu on 6000 controller

High Utilization on a process can be caused by anything, theoretically.  TAC has to find out why it is happening with you specifically.  The fpcli process having high utilization does not point to anything specifically.

 

Are you having performance issues?

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: