This is my cluster output:-
#show lc-cluster group-membership
Cluster Enabled, Profile Name = "lab-profile"
Redundancy Mode On
Active Client Rebalance Threshold = 50%
Standby Client Rebalance Threshold = 75%
Unbalance Threshold = 5%
AP Load Balancing: Enabled
Active AP Rebalance Threshold = 50%
Active AP Unbalance Threshold = 5%
Active AP Rebalance AP Count = 10
Active AP Rebalance Timer = 5 minutes
Cluster Info Table
------------------
Type IPv4 Address Priority Connection-Type STATUS
---- --------------- -------- --------------- ------
self 10.10.199.56 128 N/A CONNECTED (Member)
peer 10.10.199.57 128 L2-Connected CONNECTED (Leader, last HBT_RSP 23ms ago, RTD = 0.000 ms)
These IPs are not reachable by the APs :( So I will need to reconfigure with the network that is reachable by the APs.
I am a newbie when it comes to Aruba as I am familiar with the Cisco WLAN infrastructure. So apologies for the basic questions.
One final question for this topic, does the master need to be as powerful as the 7240XM as in does it need to support the same number of APs and devices as the MD? I ask this because I'm using a basic master VM setup.