Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎11-21-2011

How can I change AP-61 air-monitor to ap-mode?

[ Edited ]

Hi,

 

I don't need Air Monitor in my environment and select ap-mode in Radio Profile but 3 of my AP-61 become air monitor, while AP-105 work in proper ap-mode. how i can change AP-61 air-monitor to ap-mode.

controller is A-200 with OS v. 5.0.3.3.

 

Thanks.

MVP
Posts: 978
Registered: ‎04-13-2009

Re: Terms of Service

Hi,

 

You should probably post this in the appropriate forum rather than on a blog post. However there are separate radio profiles for 802.11g and 802.11a radios so you might have the mode set to ap-mode on the 802.11a profile but not on the 802.11g profile. 

 

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Aruba Employee
Posts: 571
Registered: ‎04-17-2009

Re: How can I change AP-61 air-monitor to ap-mode?


mhnasir wrote:

Hi,

 

I don't need Air Monitor in my environment and select ap-mode in Radio Profile but 3 of my AP-61 become air monitor, while AP-105 work in proper ap-mode. how i can change AP-61 air-monitor to ap-mode.

controller is A-200 with OS v. 5.0.3.3.

 

Thanks.


Do you have mode aware arm turned on? If that is the case, the only way you could force those three AP-61 back into ap mode, without turning off mode aware, is to create ap specific profiles for those three AP-61. In the ap specific profile, disable mode aware arm.

Thanks,

Zach Jennings
Search Airheads
Showing results for 
Search instead for 
Did you mean: