Wireless Access

Reply
Occasional Contributor II

How can i untrust the port Pc2 in vlan in aruba controller

Hi 

 

I need someone who can help me on how to remove or untrust the pc2 in vlan. Below is the controller vlan and I need to remove the port pc2 and untrust that from the vlan 2101 and i want to leave the pc1 as trusted.

 

2101   VLAN2101       Pc1-2               N/A 

 

#show port trusted

GE 1/0
GE 1/1
GE 1/2
GE 1/3
Pc 1
Pc 2

Guru Elite

Re: How can i untrust the port Pc2 in vlan in aruba controller

I can go into how trusted and untrusted vlan interfaces work, but first, what are you trying to do?

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: How can i untrust the port Pc2 in vlan in aruba controller

I just want to untrust pc2 in the controller.

Guru Elite

Re: How can i untrust the port Pc2 in vlan in aruba controller

Did you try this?

 

config t

interface port-channel 2

no trusted

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: How can i untrust the port Pc2 in vlan in aruba controller

We already fix the issue.

What we did is, to remove the unsed port-channel from the mgmt int and vlan is we just "remove the trunk mode" from the port channel and it fix everything.

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: