Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
How to assign an IP address to a controller
How to assign an IP address to a controller
09-08-2016 09:21 PM
First I want to remove a IP address associated with vlan1 that is 192.168.100.2
And then I want to create vlan100 and assign the same IP address to vlan 100 and make that as controller IP address...
I NEED TO KNOW CLI CMDS FOR THE ABOVE...
REGARDS,
Mallikarjun
And then I want to create vlan100 and assign the same IP address to vlan 100 and make that as controller IP address...
I NEED TO KNOW CLI CMDS FOR THE ABOVE...
REGARDS,
Mallikarjun
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: How to assign an IP address to a controller
Re: How to assign an IP address to a controller
09-09-2016 03:48 AM
The user guide is here: http://www.arubanetworks.com/techdocs/ArubaOS_65x_WebHelp/Web_Help_Index.htm
The command to change the ip address on an interface is here: http://www.arubanetworks.com/techdocs/ArubaOS_65x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/1CommandList/interface_vlan_.htm?Highlight=interface vlan
******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator