Wireless Access

Reply
New Contributor
Posts: 1
Registered: ‎04-14-2014

How to configure Aruba AP 105 to capture packets and including the radiotap header.

Hi all,

 

I have Aruba AP 105 and configured to capture raw packets. When i sniff packets using Wireshark or OmniPeak, the captured packtes doesn't contain radiotap header which is required to get the RSSI value. Can anybody help?

MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: How to configure Aruba AP 105 to capture packets and including the radiotap header.

If you capture with an AirPcap adapter you will see the radiotap info.

 

When using packet capturing on the AP-105 and sending to OmniPeek, you should see noise floor and signal level in the packet info section of the decode:

 

decode.jpg

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Search Airheads
Showing results for 
Search instead for 
Did you mean: