Wireless Access

Reply
MVP
Posts: 1,401
Registered: ‎05-28-2008

How to enable client match? Best config tips?

[ Edited ]

Hi Guys,

I'm doing some POC of testing 6.3.0.0 , With two 135 units.

Is there any config tips on how to enable clientmatch feature? What is the best configuration for it - please advise.

 

Thanks.

 

Me

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
MVP
Posts: 4,228
Registered: ‎07-20-2011

Re: How to enable client match? Best config tips?

 

You need AOS 6.3.x.x

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 1,401
Registered: ‎05-28-2008

Re: How to enable client match? Best config tips?

[ Edited ]

You think so :)

 

i know that - it was a mistype. (in the above post - i fixed it)

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
MVP
Posts: 1,401
Registered: ‎05-28-2008

Re: How to enable client match? Best config tips?

vfabian - i have 620 with 6.3.0.0 with two,Is there any config tips on how to enable clientmatch feature? What is the best configuration for it - please advise. AP135 units...
*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
MVP
Posts: 1,401
Registered: ‎05-28-2008

Re: How to enable client match? Best config tips?

Anyone? :smileysurprised:

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
MVP
Posts: 4,228
Registered: ‎07-20-2011

Re: How to enable client match? Best config tips?

[ Edited ]

 

Pretty straight forward to config and the most important thing are the show commands that woud allow you see that Client Match is working 

All Profile Management_2013-07-11_11-35-06.png

 

ArubaOS_6.3CLI.pdf - Adobe Reader_2013-07-11_11-38-49.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 1,401
Registered: ‎05-28-2008

Re: How to enable client match? Best config tips?

10x
*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
MVP
Posts: 4,228
Registered: ‎07-20-2011

Re: How to enable client match? Best config tips?

 

 

Could also use the debugging to see in more detail what's going

 

(controller) (config) #logging level debugging arm-user-debug <devicemac>

 

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
fn
Occasional Contributor II
Posts: 16
Registered: ‎01-27-2011

Re: How to enable client match? Best config tips?

Hi,

 

and howto remove a client (false) marked "unsteerable" ?

 

Thanks.

Aruba Employee
Posts: 42
Registered: ‎07-30-2010

Re: How to enable client match? Best config tips?

Client Match                                                                      Enabled

Client Match report interval (sec)                                  30

Client Match Unsteerable Client Ageout (min)           2880          <--------- Edit this value to desired for age-out of unsteerable entries

Client Match Sticky Client Check Interval (sec)           3

Client Match Sticky client check SNR (dB)                   25

Client Match SNR threshold(dB)                                   10

Client Match Sticky Min Signal                                        70

Client Match Restriction timeout (sec)                          20

Client Match Load Balancing threshold (%)                20

Client Match VBR Stale Entry Age (sec)                       120

Client Match Max steer failures                                      5

Client Match Load Balancing client threshold            10

Client Match Load Balancing SNR threshold (dB)     30

Barath Srinivasan
Customer Engineering Architect
Customer Advocacy | Aruba Networks Inc.
-----------------------------------------------------------------------------------------------------------
Did something you read in the Community solve a problem for you? If so, click "Accept as Solution", in the bottom right hand corner of the post.
-----------------------------------------------------------------------------------------------------------
Search Airheads
Showing results for 
Search instead for 
Did you mean: