Wireless Access

Reply
Occasional Contributor II
Posts: 13
Registered: ‎04-24-2010

How to go RedBoot> on MSR2K.

Hi.

 

I tried to upgrade one of MSR2K from version 4.2 to 4.3. But it looks failed......

Other box was works fine from 4.2--4.3--4.4--4.5--4.6--4.7.

 

I would like to recover re-install image.

 

Does anyone know how to recover MSR2K like as AOS cpboot> upgrade ?

MSR2K is old one (serial port is 115200) .

 

The console message was follows...

-----------------------------------------------------

decompression error: invalid stored block lengths

RedBoot> exec

Can't execute Linux - invalid entry address

RedBoot> fis load -d "kernel bak"

Not a loadable image - try using -b ADDRESS option

RedBoot> exec

Can't execute Linux - invalid entry address

RedBoot> fis load -d kernel

decompression error: invalid stored block lengths

RedBoot> exec

Can't execute Linux - invalid entry address

RedBoot> fis load -d "kernel bak"

Not a loadable image - try using -b ADDRESS option

RedBoot> exec

Can't execute Linux - invalid entry address

RedBoot> fis load -d kernel

decompression error: invalid stored block lengths

RedBoot> exec

Can't execute Linux - invalid entry address

RedBoot> fis load -d "kernel bak"

Not a loadable image - try using -b ADDRESS option

Aruba
Posts: 161
Registered: ‎04-03-2007

Re: How to go RedBoot> on MSR2K.

You need TAC to help you with this, please open a case.

 


-cl
Occasional Contributor II
Posts: 13
Registered: ‎04-24-2010

Re: How to go RedBoot> on MSR2K.

Okay , Thanks !!

Search Airheads
Showing results for 
Search instead for 
Did you mean: