Hello.
One small qusition: how can I restore a configuration from a tftp server via ssh and force the controller to push this configuration to all accesspoints?
I do (on controller)
# tftp [tftp-server-ip] [filename] system config
and get
please reboot the AP to apply the new configuration
All fine after "# reload" if there is only one accesspoint.
Not, if there are more than one.
What happens then is:
If I reload the contoller accesspoint is, that the controller accesspoint reboots and after that gets the old config from one of the other accesspoint which is now the new controller.
In this way I will never be able to restore the configuration of all present accesspoints.
So my question ist:
How can I force the controller to push the uploaded configuration to all accesspoints and force all accesspoints to reboot?
(This is what happens if the restore is done on the web interface)
Best regards,
All-X