Wireless Access

last person joined: 3 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

[IAP-205H] Can't get IP Address via E0/PT port

This thread has been viewed 0 times

  • 1.  [IAP-205H] Can't get IP Address via E0/PT port

    Posted Oct 17, 2016 10:27 AM

         I have an issue about E0/PT port on Aruba IAP-205H. When I connect a lan cable from my router to E0/PT port, I can't get an IP Address.

         But When I connect to E0 Port on the rear side, It's working fine.

         I need to use E0/PT port on the bottom because my mounting kit is AP-205H-MNTR.

         Please advise. Thank you.

     



  • 2.  RE: [IAP-205H] Can't get IP Address via E0/PT port

    EMPLOYEE
    Posted Oct 18, 2016 11:41 PM

    If you want to use the E0/PT port, then you need to jump the E0 to PT port on the rear of the AP. The mounting kit includes a short jumper for this.

     

    -Mike