Wireless Access

Reply
Occasional Contributor II
Posts: 137
Registered: ‎10-05-2015

IAP High memory Util. 75%

Hi there,

 

we monitor one IAP that has regarding Airwave 1 potenital issue. We looked at it, and it reports very hijh Memory Utilization.

 

See screenshot. How can this be solves, and or what precautions can we take?

 

Currently it has 10 clients. Fixed clietns are in total 7, some guest users it can take up to 15-20 users at the same time. DHCP for fixed users is doen by router, Guest users get IP from IAP DHCP.

 

Aruba
Posts: 1,296
Registered: ‎08-29-2007

Re: IAP High memory Util. 75%

What is the AP model and version of software it is running?

 

In any case, that figure is nothing to be concerned about.  If you see it getting upwards of 85% then you should raise a TAC case.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Occasional Contributor II
Posts: 137
Registered: ‎10-05-2015

Re: IAP High memory Util. 75%

Hi there we are running IAP103

 

Coup are running 4.1.3.0 - avg Memory Usage 91MB

Couple are running 4.1.1.13 - avg Memory Usage 93MB

New Contributor
Posts: 4
Registered: ‎06-21-2016

Re: IAP High memory Util. 75%

I am also experiencing this issue and have the following:

 

ArubaOS (MODEL: 205), Version 6.5.1.0-4.3.1.1

13 IAPs in the environment

 

High Memory Utilization (90%+ for over 2 weeks now)

 

Show Tech gives me the following Memory utilization data:

 

CPU and Memory Usage
--------------------
Timestamp CPU Util(%) Memory Util(%)
--------- ----------- --------------
2017-05-18 11:09:39 17 96
2017-05-18 11:09:29 10 96
2017-05-18 11:09:18 21 96
2017-05-18 11:09:06 16 94
2017-05-18 11:08:56 18 94
2017-05-18 11:08:45 12 94
2017-05-18 11:08:35 15 94

Peak CPU Util in the last one hour
----------------------------------
Timestamp CPU Util(%) Memory Util(%)
--------- ----------- --------------
2017-05-18 11:07:09 33 95

 

The master AP has between 3-8MB of Free Memory and all the other APs in the cluster have 30+MB free.  I've rebooted the master to see if that alleviates any utilization problems.

 

I also noticed in the release notes for 6.5.1.0-4.3.1.2 that there's a datapath bug (154065) relating to the issue we're seeing.  Should we still be seeing the high memory utilization on the VC though?

 

Thanks

Guru Elite
Posts: 21,493
Registered: ‎03-29-2007

Re: IAP High memory Util. 75%

Are you running Apprf?  



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 4
Registered: ‎06-21-2016

Re: IAP High memory Util. 75%

Yes, we are.  We have the visibility se to ALL.  What is the best practice with the IAP-205 for AppRF visibilty?

 

Thank you!

Search Airheads
Showing results for 
Search instead for 
Did you mean: