Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP (RAP Mode) - Split Tunnel Problem

This thread has been viewed 0 times

  • 1.  IAP (RAP Mode) - Split Tunnel Problem

    Posted May 07, 2018 12:28 AM

    Hello,

     

    I have an iap315 provisioned as rap to a 7005 controller.

     

    I have two SSID's in that Rap Ap group.

     

    When I set in split-tunnel fordwarding mode the web and app are not blocked/filtered.

     

    Is the app/web filter/block possible in split-tunnel mode?

     How can i achive that?

     

    grettings!



  • 2.  RE: IAP (RAP Mode) - Split Tunnel Problem
    Best Answer

    EMPLOYEE
    Posted May 08, 2018 07:19 AM

    App and Web classification is done at the controller, so if the traffic hits the controller (tunneled, action:permit) it should work. If the traffic is switched locally (route-nat), it is not expected to work.



  • 3.  RE: IAP (RAP Mode) - Split Tunnel Problem

    Posted May 08, 2018 12:51 PM
    @Herman Roberswrote:

    App and Web classification is done at the controller, so if the traffic hits the controller (tunneled, action:permit) it should work. If the traffic is switched locally (route-nat), it is not expected to work.

    Ok. Thank you.