Wireless Access

Reply
Contributor I
Posts: 64
Registered: ‎06-07-2014

IAP queries

[ Edited ]

We are planning to deploy IAP 103- 7qty. Please help with below queries:-

 

1) How many users can we create in internal database.

2) We are using unmanagable switch, will this be a problem for IAP's to form a cluster.

3) If there is some coverage hole, can i extend the signal using a repeater.

 

Thanks.

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: IAP queries

Hi Mohan,

 

IAP internal user DB will support upto 512 users Please make a note, IAP-9x supports only 256 user entries. If there are already 512 users, IAP-9x will not be able to join the cluster

 

To form a cluster IAPs should be in the same broadcast domain hence it doesn't matter whether it is a manageable switch or unmanageable switch.

 

Coverage holes all depends on your deployment . don't forget you have IAP mesh point option available.

 

Please feel free for any further help on this.

 

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Contributor I
Posts: 64
Registered: ‎06-07-2014

Re: IAP queries

Hi Venu....thanks for your reply....we will be using wpa2/presahred key as authenticaiton. Currently we will not deploy IAP's in mesh mode...please confirm if we can use repeaters...

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: IAP queries

HI Mohan,

 

Yes we can connect an IAP to a third party bridge by configuring WiFi uplink.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Contributor I
Posts: 64
Registered: ‎06-07-2014

Re: IAP queries

Thanks for your help Dhanraj...

Search Airheads
Showing results for 
Search instead for 
Did you mean: