Wireless Access

Reply
Highlighted
Guru Elite

Re: IAPs and dealing with connecting to wireless clients

If you want traffic from a server, you need to define from that IP address to any allow.  If not, traffic back to a server requires that traffic is initiated by the client.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Super Contributor II

Re: IAPs and dealing with connecting to wireless clients

In the IAP, how do we define "..from that IP address.."?

When creating the roles and adding rules, there is no source to destination, just destination.

2017-11-14_10h36_48.png

Guru Elite

Re: IAPs and dealing with connecting to wireless clients

In your diagram, the source is network.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Super Contributor II

Re: IAPs and dealing with connecting to wireless clients

The source can only be a port, not a defined network.

 

So for instance, if my server subnet is 192.168.2.0/24.

And there is a server that initiates communication to a client over port 10086.

I would put the rule as follows?

2017-11-14_10h51_05.png

Sorry for all the stupid questions. I feel like I am missing something obvious.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: