Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Is FTRJ8519P1BNL-PT comaptible with M3 controller?

This thread has been viewed 0 times

  • 1.  Is FTRJ8519P1BNL-PT comaptible with M3 controller?

    Posted May 05, 2015 11:33 AM

    Hi All,

     

    I would like to confirm if FTRJ8519P1BNL-PT is comaptible with M3 controller or not. I checked in Aruba Interoperability list and I do not see it listed.

     

    Below is the output about the SFP being used;

     

    # show interface gigabitethernet 0/0 transceiver

    Module is SFP
    Manufacturer : FINISAR CORP.
    Part Number : FTRJ8519P1BNL-PT, rev: A
    S/N : P9H17A4
    Date Code : 060501 Lot:
    Optional Signals : LOS Tx Disable
    Supported Modes : 1000Base-SX, LC Connector

     

    Thanks in advance.

     

    Regards,

     

    Karthikeyan Mookkandi



  • 2.  RE: Is FTRJ8519P1BNL-PT comaptible with M3 controller?
    Best Answer

    EMPLOYEE
    Posted May 05, 2015 11:56 AM

    If it is not on the list or in the M3 installation guide, it is not supported.  It might work, though.



  • 3.  RE: Is FTRJ8519P1BNL-PT comaptible with M3 controller?

    Posted May 05, 2015 12:11 PM
    Thank you!