Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎09-15-2016

Is it true that an MST 200 will factory default after seven reboots?

 
MVP
Posts: 554
Registered: ‎11-04-2011

Re: Is it true that an MST 200 will factory default after seven reboots?

You have found the factory-reset procedure:

http://community.arubanetworks.com/t5/Community-Tribal-Knowledge-Base/Aruba-AirMesh-MSR2000-Outdoor-Wireless-Mesh-Router-Password/ta-p/82216

 

Note that this only occurs if you are constantly rebooting the MSR/MST. During normal operations, this should not happen.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
New Contributor
Posts: 3
Registered: ‎09-15-2016

Re: Is it true that an MST 200 will factory default after seven reboots?

Thanks very much. The article that you refered me to is great and it confirms what I have heard other say. However, the article mentions "per the user guide" and that is what I am looking for. I asked my question on this forum because I could not find supporting docs for this question. Can you point me to the actual documentation? I believe you and trust you, its just that I am trying to research this and I could really use documentation for it. Thanks

MVP
Posts: 554
Registered: ‎11-04-2011

Re: Is it true that an MST 200 will factory default after seven reboots?

Sure, the documentation is available from the support website:

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/11214/Default.aspx

 

If you download the Aruba MeshOS 4.7 User Guide, it's on page 180.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
New Contributor
Posts: 3
Registered: ‎09-15-2016

Re: Is it true that an MST 200 will factory default after seven reboots?

Thanks very much

Search Airheads
Showing results for 
Search instead for 
Did you mean: