Wireless Access

Reply
New Contributor

Is there a CLI command to show air monitor details similar to what is in the GUI.

When I do a "show ap database-summary" it shows that I have multiple are monitors.

From the GUI I can easily click on "All Air Monitors to see them"

 

Is there a CLI command to chow the same basic AM information (eg. Name, Ap Group, Status, IP,  etc...)  ?

 

 

Thanks

Re: Is there a CLI command to show air monitor details similar to what is in the GUI.

you cna likely do a 'show ap database | include AM' (not it's case sensitive, but whatever is after the include would be a search string for any string in the line output.

Jerrod Howard
Sr. Technical Marketing Engineer
New Contributor

Re: Is there a CLI command to show air monitor details similar to what is in the GUI.

Hi.

Yeah I tried that and it did not show them.

 

I have 32 AM's on a local controller and I tried to show them from both the master and the local and I can't find a command that does it from the CLI.


The easiest way I can find it to go into the gui but if the gui can differenciate them I assume there has to be a way in the CLI to do the same.

 

Thanks,

Dave

Highlighted
Guru Elite

Re: Is there a CLI command to show air monitor details similar to what is in the GUI.

"show ap active | include AM"

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
New Contributor

Re: Is there a CLI command to show air monitor details similar to what is in the GUI.

That worked.

 

Thanks Joseph.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: