Wireless Access

last person joined: 13 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

M3 code upgrade from 6.2 to 6.3 or 6.4?

This thread has been viewed 0 times

  • 1.  M3 code upgrade from 6.2 to 6.3 or 6.4?

    Posted May 24, 2016 11:23 AM

     

    We have two 6000/M3 controllers configured as master/backup master running 6.2.1.5 code.  A few months ago we ran into a SNMP issue between the controller and Airwave.  At that time TAC suggested we upgrade to the latest 6.3 code train.  More recently TAC advised me to upgrade to the latest 6.4 code train.

     

    We aren’t looking for any new features ( perhaps clientmatch if it helps sticky clients ) , we are more interested in stability and getting on a newer code train with the latest security updates.

     

    With our older hardware, does anyone have any suggestions/experience with either 6.3 or 6.4 on an M3? 

     

    Thanks