Wireless Access

Reply
Occasional Contributor II

Manage read/write mode when ap is down

My ap is showing down in airwave and it is in monitor mode.I tried to move it to manage read/write mode but got the message "The following devices do not support management mode"

 

Can someone explain this to me

Guru Elite

Re: Manage read/write mode when ap is down

If this is a Campus AP, you should only put the controller in read-write mode, because that is what sends the commands to the APs.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: Manage read/write mode when ap is down

These are Remote Ap's

 

 

Guru Elite

Re: Manage read/write mode when ap is down

Remote APs get their configuration from the controller.  Only the controller configuration is managed by Airwave.  The remote AP configuration is pushed only to the controller from Airwave, not directly to the APs themselves.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: