Wireless Access

Reply
Occasional Contributor II

Manually set IP on AP-124

I was able to console in to the AP-124 and ran the following commands after interrupting the boot process:

 

setenv ipaddr 10.10.10.10

setenv mask 255.255.0.0

setenv gatewayip 10.10.10.1

saveenv

 

When the ap reboots it still gets a DHCP IP address.

 

Controller Information:

Controller ModelAruba7220-US
CountryUS
HardwareRestricted US
ArubaOS Version6.2.1.1

 

Thanks for any assistance,

Fernando

Guru Elite

Re: Manually set IP on AP-124

the netmask variable is not "mask" it is "netmask"



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II

Re: Manually set IP on AP-124

Ok great thanks. that worked. didn't realize that it will still take variables that are not valid.

Regular Contributor II

Re: Manually set IP on AP-124

I had to set the master ip and server ip

setenv master {master ip}

setenv serverip {master ip}

Re: Manually set IP on AP-124

Here is a document that could be useful for you

Im attaching to this message

 

Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: