Wireless Access

Reply
Regular Contributor I
Posts: 238
Registered: ‎01-19-2013

Master Backup/Master Controller redundancy

Hi community,

 

I´ve a full configured 7030 Controller (all SSID, AP Goups and so on).

Now I want to add a second Controller as standby master, I know the Vlan config, port config... I must configure at the new standby/master controller.

Does the Master controller sync its config to the standby controller include all ssid ap profiles and so on?

 

Does it metter if the standby Contoller is an other Controller model?

 

Thanks

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Master Backup/Master Controller redundancy

[ Edited ]
The master will push all the config ( ALCs, Roles, SSIDs , VAPs ,RF , etc) to the standby master except :
- VLANs
- SMNP
- Syslog
- Clock
- interfaces
- and few more
You need to make sure that the standby master has the same or more AP capacity as the master and also be on the same level of AOS code, if you are not using centralized licensing then you need to install the licenses in the standby master
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Regular Contributor I
Posts: 238
Registered: ‎01-19-2013

Re: Master Backup/Master Controller redundancy

Are the ap groups also synced?

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Master Backup/Master Controller redundancy

Yes
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: