Wireless Access

Reply
Occasional Contributor II
Posts: 15
Registered: ‎01-15-2014

Master Redundancy

I have a master controller. I want to add another controller as master backup. Can we put master IP as virtual VRRP IP ? The reason is that I have only static IP method for AP discover controller.

Frequent Contributor II
Posts: 119
Registered: ‎01-14-2013

Re: Master Redundancy

HI,

 

in a master/standby deployment. You need 3 IPs. IP master controller , IP standby controller and the same virtual IP on both controllers.

The virtual IP (VRRP) is used for provisioning the AP .

 

"The master controller owns the configured virtual IP address for the VRRP instance. When the master controller becomes unavailable, a backup controller steps in as the master and takes ownership of the virtual IP address. All network elements (APs and other controllers) can be configured to access the virtual IP address, thereby providing a transparent redundant solution to your network."

 

Look at this:

 

http://www.arubanetworks.com/techdocs/ArubaOS_61/ArubaOS_61_UG/VRRP.php

 

Best regards!

 

 

 

Guru Elite
Posts: 8,643
Registered: ‎09-08-2010

Re: Master Redundancy

You could use the existing IP for the VRRP address and give the controller a new one but your APs would lose connectivity for a few minutes while you reconfigure the controller.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: