Wireless Access

Reply

Max Speed Test With Aruba AirMesh

Hi,

how can i get the mex speed in la envirement of 2 MST, the best result that i got was 100 mbps, can i improve it.

Regards


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Guru Elite

Re: Max Speed Test With Aruba AirMesh

Please give us more details on your setup.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: Max Speed Test With Aruba AirMesh

 

2 MST 200

Open MeshID

2 PC with iperf

10 metter distance


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]

Re: Max Speed Test With Aruba AirMesh

Channel, channel width, config in terms of this being L2 or L3 mesh (VPLM, etc), also note that 10m might be over-driving the radios. What is the mesh link RSSI? You may have to back the power off a bit. 

Jerrod Howard
Sr. Technical Marketing Engineer

Re: Max Speed Test With Aruba AirMesh

Channel = 100 (auto)

channel width = 40 MHz

 config in terms of this being L2 or L3 mesh= L2

What is the mesh link RSSI= test (mesh link)

You may have to back the power off a bit = why ?


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Guru Elite

Re: Max Speed Test With Aruba AirMesh

What is the distance between the devices?

 

Outdoor AP radios are very sensitive, so if they are very close to each other there will be distortion at the receiver and it is possible that you can also overdrive the radio, causing possible permanent damage.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: Max Speed Test With Aruba AirMesh

the distance is 10 metter


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]

Re: Max Speed Test With Aruba AirMesh

my real question is : how to get the max speed rate in a lab envirmenet ?


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]

Re: Max Speed Test With Aruba AirMesh

Already explained the power issue, if the radios are too close or too loud, they can overdrive the receivers and cause performance issues. If the intent is to get max performance in a lab, you likely won't. They aren't designed for that and don't work optimally when the APs are too close together, too loud, combination of, etc. Max rate is 120-140Mbps, so you getting 100Mbps is likely max for 11n HT40 in that setup.

Jerrod Howard
Sr. Technical Marketing Engineer

Re: Max Speed Test With Aruba AirMesh

thanks howard for the replay,  i will try to reduce the power , but if the the Theoretical speed is 300 mbps , am expecting to recieve at least 50 % in lab envirment , so what are your recommendation to bust up the speed in my lab.


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: