Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Mobile First Base Design Lab for AOS 8

This thread has been viewed 3 times

  • 1.  Mobile First Base Design Lab for AOS 8

    EMPLOYEE
    Posted Aug 06, 2018 07:00 PM

    Our base reference design and best practice recommendations for building a mobile-first architecture.  Please reach out to me with any questions

    https://www.arubanetworks.com/assets/vrd/MobileFirstBaseDesignsLab_ArubaOS8.pdf

     



  • 2.  RE: Mobile First Base Design Lab for AOS 8

    Posted Mar 11, 2019 11:37 PM

    Hello,

     

    I am setting up my configuration to mimic your example in the VRD and noticed a couple of things:

     

    1) The AP’s are on VLAN 92 but there is no DHCP config on the controller nor is there DHCP-Relay configured on the Core switch. How are the AP’s going to receive addresses (I assume you aren’t recommending static)?

     

    2) VLAN 92 for the AP’s also has jumbo packet enabled at the Core Switch but doesn’t continue that setting at the Access Level Switch.

     

    Any feedback is appreciated!

     

    -Travis