10-19-2015 08:59 PM
I need some Aruba referral case that work with Automated guide vehicle (AGV).
Currently i have a new Aruba project that require to work with end user agv machine.
The requirement of the machine as below:
1. connect 2.4GHz SSID
2. less signal strength fluctuation.
3. only use 1 WLAN channel. (the channel must be no used by other AP)
I need to review and study other aruba project that have similar case or work with AGV, so that, i able to configure the Aruba controller for fulfill end user requirement.
03-12-2016 05:44 PM
You have an update on how this project went? I'm curious about the implementation.
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.