Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

New Aruba Solution Exchange for RF Optimization based on building types

This thread has been viewed 0 times

  • 1.  New Aruba Solution Exchange for RF Optimization based on building types

    EMPLOYEE
    Posted Nov 06, 2014 12:10 PM

    See below for the link and summary.  

     

    This RF optimization solution will modify a selected "existing" AP-group as well as "clone" selected "existing" Virtual AP profile[s] and "existing" SSID profile[s] to create new optimized equivalent profile[s] with a user selected "suffix" appended to the existing profile[s] name . Using "existing" Virtual and SSID profile[s] are necessary to enable a successful "clone" of the existing parameters in each profile[s] that are to be maintained and not required to be optimized [i.e.VLAN,encryption mode, ESSID]. New radio, arm and ht-radio profiles will also be created based on the selected deployment model. All of the newly optimized profiles will then be applied to the AP-group. The original "cloned" profiles will be removed from the AP-group.

     

    https://ase.arubanetworks.com/solutions/id/75



  • 2.  RE: New Aruba Solution Exchange for RF Optimization based on building types

    Posted Nov 06, 2014 12:13 PM

    Very cool