Bonjour,
We re-installed our Airwave to go to the CentOS 6 based version 7.7.
We started from scratch and, after configuration, pointed Airwave at our Master controller and it imported all the installed APs, along with their Floor plan information.
We then provisionned new APs (AP-105, our normal AP). After the normal Select-AP-Group, Define-FQLN, Define-AP-name and Apply-and-reboot steps, all is good on the controller.
But, Airwave doesn't show the Floor plan information. Everything else is there. See the enclosed screen shots.
We re-pooled the AP numerous times.
Versions: ArubaOS 6.1.3.9 on 2 x M3, Airwave 7.7.3 on dedicated hardware
Any ideas ?