I receive following message from console, and I tried to reset this AP few times, no change...I am stuck now.
Any suggestion? Thanks in advanced.
------------------------------------------------------------------------------------------
APBoot 2.1.4.7 (build 57679)
Built: 2016-12-08 at 15:43:35
Model: AP-36x
DRAM: 512 MiB
Flash: Detected W25Q32FV_SPI: total 4 MiB
NAND: 128 MiB
Power: POE
Net: eth0
Radio: ipq4029#0, ipq4029#1
Reset: warm
FIPS: passed
Hit <Enter> to stop autoboot: 0
Checking image @ 0x0
Invalid image format version: 0x0
Checking image @ 0x2000000
Copying image from 0x84000000
Image is signed; verifying checksum... passed
SHA2 Signature available
Signer Cert OK
Policy Cert OK
RSA signature verified using SHA2.
Uncompressing Kernel Image ... OK
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.5.2.0-6.5.2.0 (build 57911 / label #57911)
[ 0.000000] Built by p4build@lesbos on 2017-01-03 at 19:47:26 PST (gcc version 4.6.3)
[ 0.000000]
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.023927] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.052224] i2c-gpio driver registered
[ 9.224568] 3 ofpart partitions found on MTD device 7980000.qcom,nand
[ 9.295051] Creating 3 MTD partitions on "7980000.qcom,nand":
[ 9.363787] 0x000000000000-0x000002000000 : "aos0"
[ 9.463401] 0x000002000000-0x000004000000 : "aos1"
[ 9.550459] 0x000004000000-0x000008000000 : "ubifs"
[ 9.684429] m25p80 spi0.0: found w25q32, expected n25q128a11
[ 9.764890] Found AT97SC3203 on MSM-I2C-v2-adapter
[ 9.815188] Key type dns_resolver registered
[ 9.860839] Registering SWP/SWPB emulation handler
[ 11.555704] TZ dump found for reboot
[ 11.634946]
Starting Kernel SHA1 KAT ...
[ 11.669432] Completed Kernel SHA1 KAT
[ 11.716259] Starting Kernel HMAC-SHA1 KAT ...
[ 11.766447] Starting Kernel DES KAT ...[ 11.812227] Completed Kernel DES KAT
[ 11.855887] Starting Kernel AES KAT ...
[ 11.899664] Completed Kernel AES KAT
[ 11.899664]
[ 11.963252] Starting Kernel AESGCM KAT ...
[ 12.010007] Completed Kernel AESGCM KAT
[ 12.059291] Completed Kernel HMAC-SHA1 KAT
Thu Jan 1 00:00:00 PST 1970
[ 12.264591] msm_nand_read_oob: 0x5b01800 datalen 0x800 ooblen 0 err -74 corrected 0
[ 12.343822] UBI warning: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 216:4096, read only 2048 bytes, retry
[ 12.488611] msm_nand_read_oob: 0x5b01800 datalen 0x800 ooblen 0 err -74 corrected 0
[ 12.579245] UBI warning: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 216:4096, read only 2048 bytes, retry
[ 12.724022] msm_nand_read_oob: 0x5b01800 datalen 0x800 ooblen 0 err -74 corrected 0
[ 12.814657] UBI warning: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 216:4096, read only 2048 bytes, retry
[ 12.959412] msm_nand_read_oob: 0x5b01800 datalen 0x800 ooblen 0 err -74 corrected 0
[ 13.050095] UBI error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 216:4096, read 2048 bytes
[ 13.179907] UBI assert failed in ubi_io_read at 202 (pid 119)
[ 13.248656] UBIFS error (pid 119): ubifs_leb_read: reading 126976 bytes from LEB 5:0 failed, error -5
[ 13.358910] UBIFS error (pid 119): ubifs_start_scan: cannot read 126976 bytes from LEB 5:0, error -5
mount: Mounting ubi2:ubifs on /aruba/fs failed: Input/output error
Mount ubifs fail
Will reboot to mount ubifs
killall: nanny: no process killed
killall: sapd: no process killed
cd: 15: can't cd to /tmp/apfc
apfcutil: read failed: Is a directory
killall: wdg: no process killed
SIOCSIFADDR: No such device
The system is going down NOW !!
Sending SIGKILL to all processes.
Unmounting UBIFS failed. Please report this error (Invalid argument).
Please stand by while rebooting the system.
[ 23.113716] reboot: Restarting system